Concept

The term "fluid" in everyday language typically refers only to liquids, but in the realm of physics, fluid describes any gas or liquid that conforms to the shape of its container. Fluid mechanics is the study of gases and liquids at rest and in motion. This area of physics is divided into fluid statics, the study of the behavior of stationary fluids, and fluid dynamics, the study of the behavior of moving, or flowing, fluids. Fluid dynamics is further divided into hydrodynamics, or the study of water flow, and aerodynamics, the study of airflow. Applications of fluid mechanics include a variety of machines, ranging from the water-wheel to the airplane. In addition, the study of fluids provides an understanding of a number of everyday phenomena, such as why an open window and door together create a draft in a room.

How It Works

The Contrast Between Fluids and SolidsTo understand fluids, it is best to begin by contrasting their behavior with that of solids. Whereas solids possess a definite volume and a definite shape, these physical characteristics are not so clearly defined for fluids. Liquids, though they possess a definite volume, have no definite shape—a factor noted above as one of the defining characteristics of fluids. As for gases, they have neither a definite shape nor a definite volume.One of several factors that distinguishes fluids from solids is their response to compression, or the application of pressure in such a way as to reduce the size or volume of an object. A solid is highly noncompressible, meaning that it resists compression, and if compressed with a sufficient force, its mechanical properties alter significantly. For example, if one places a drinking glass in a vice , it will resist a small amount of pressure, but a slight increase will cause the glass to break.Fluids vary with regard to compressibility, depending on whether the fluid in question is a liquid or a gas. Most gases tend to be highly compressible—though air, at low speeds at least, is not among them. Thus, gases such as propane fuel can be placed under high pressure. Liquids tend to be noncompressible: unlike a gas, a liquid can be compressed significantly, yet its response to compression is quite different from that of a solid—a fact illustrated below in the discussion of hydraulic presses.One way to describe a fluid is "anything that flows"—a behavior explained in large part by the interaction of molecules in fluids. If the surface of a solid is disturbed, it will resist, and if the force of the disturbance is sufficiently strong, it will deform—as for instance, when a steel plate begins to bend under pressure. This deformation will be permanent if the force is powerful enough, as was the case in the above example of the glass in a vise. By contrast, when the surface of a liquid is disturbed, it tends to flow.

Molecular Behavior of Fluids and Solids

At the molecular level, particles of solids tend to be definite in their arrangement and close to one another. In the case of liquids, molecules are close in proximity, though not as much so as solid molecules, and the arrangement is random. Thus, with a glass of water, the molecules of glass (which at relatively low temperatures is a solid) in the container are fixed in place while the molecules of water contained by the glass are not. If one portion of the glass were moved to another place on the glass, this would change its structure. On the other hand, no significant alteration occurs in the character of the water if one portion of it is moved to another place within the entire volume of water in the glass.As for gas molecules, these are both random in arrangement and far removed in proximity. Whereas solid particles are slow-moving and have a strong attraction to one another, liquid molecules move at moderate speeds and exert a moderate attraction on each other. Gas molecules are extremely fast-moving and exert little or no attraction.Thus, if a solid is released from a container pointed downward, so that the force of gravity moves it, it will fall as one piece. Upon hitting a floor or other surface, it will either rebound, come to a stop, or deform permanently. A liquid, on the other hand, will disperse in response to impact, its force determining the area over which the total volume of liquid is distributed. But for a gas, assuming it is lighter than air, the downward pull of gravity is not even required to disperse it: once the top on a container of gas is released, the molecules begin to float outward.

Fluids Under Pressure

As suggested earlier, the response of fluids to pressure is one of the most significant aspects of fluid behavior and plays an important role within both the statics and dynamics subdisciplines of fluid mechanics. A number of interesting principles describe the response to pressure, on the part of both fluids at rest inside a container, and fluids which are in a state of flow.Within the realm of hydrostatics, among the most important of all statements describing the behavior of fluids is Pascal's principle. This law is named after Blaise Pascal (1623-1662), a French mathematician and physicist who discovered that the external pressure applied on a fluid is transmitted uniformly throughout its entire body. The understanding offered by Pascal's principle later became the basis for one of the most important machines ever developed, the hydraulic press.

Hydrostatic Pressure and Buoyancy

Some nineteen centuries before Pascal, the Greek mathematician, physicist, and inventor Archimedes (c. 287-212 B.C.) discovered a precept of fluid statics that had implications at least as great as those of Pascal's principle. This was Archimedes's principle, which explains the buoyancy of an object immersed in fluid. According to Archimedes's principle, the buoyant force exerted on the object is equal to the weight of the fluid it displaces.Buoyancy explains both how a ship floats on water, and how a balloon floats in the air. The pressures of water at the bottom of the ocean, and of air at the surface of Earth, are both examples of hydrostatic pressure—the pressure that exists at any place in a body of fluid due to the weight of the fluid above. In the case of air pressure, air is pulled downward by the force of Earth's gravitation, and air along the planet's surface has greater pressure due to the weight of the air above it. At great heights above Earth's surface, however, the gravitational force is diminished, and thus the air pressure is much smaller.Water, too, is pulled downward by gravity, and as with air, the fluid at the bottom of the ocean has much greater pressure due to the weight of the fluid above it. Of course, water is much heavier than air, and therefore, water at even a moderate depth in the ocean has enormous pressure. This pressure, in turn, creates a buoyant force that pushes upward.If an object immersed in fluid—a balloon in the air, or a ship on the ocean—weighs less that the fluid it displaces, it will float. If it weighs more, it will sink or fall. The balloon itself may be "heavier than air," but it is not as heavy as the air it has displaced. Similarly, an aircraft carrier contains a vast weight in steel and other material, yet it floats, because its weight is not as great as that of the displaced water.